Precision 1.5" Prerunner Bumper Kit

Wing light holes are optional light holes which can be cut on the right and left wing of the bumper.

No Light Holes: 
No holes cut on either wing

1 Set Light Holes: 
One light hole cut on both the right and left wing

2 Set Light Holes:
Two light holes cut on both the right and left wing

The Center Light Hole customization is for those who want to add a light bar option to their bumper. Options include:

20" cut out - 20" rectangular cut out for light bar

30" cut out - 30" rectangular cut out for light bar

No cut out - No cut out for light bar

Offroad Upgrade:

Features 1/4" center, 1/4" frame mounts and larger clevis hooks 

Offroad Upgrade with Winch Mount:

Includes additional 1/4" winch mounting plate

*Our winch is modeled after a basic/standard 8000 lb. Warn. We've heard of customers that use a 12,000, but we haven’t tested anything larger than the 8000.

Standard Clevis Mounts
3/8" Thick Clevis Mounts

Off-Road Clevis Mounts
5/8" Thick Clevis Mounts

You can add rear bumper light holes for an additional charge. Light mounting clips are included.

Light holes are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

You can add rear bumper light holes for an additional charge. Light mounting clips are included.

Light holes are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Wing light holes are optional light holes which can be cut on the right and left wing of the bumper.

No Light Holes: 
No holes cut on either wing

Light Holes:

Universal light pocket on both the right and left wing

The Center Light Hole customization is for those who want to add a light bar option to their bumper. Options include:

20" cut out - 20" rectangular cut out for light bar

30" cut out - 30" rectangular cut out for light bar

No cut out - No cut out for light bar

Note: if you select winch mount setup, additional holes will be shown to mount the winch mount.

Our rear bumper with step includes integrated steps on both sides of the tailgate. 

Please note: This is a new product that may not be available for all truck makes/models/years. We’ll give you a call if we have any issues with your order.

• 3/16" gusset plates combined with 3/16" flat bar to increase rigidity within the bumper shell to accommodate increased loads
• Reinforcement package is recommended if load exceeds 85lbs

Option to move logo to the bottom right of bumper center.

NOTE: Not compatible with Offroad Upgrade.

Bumper kits are not only excellent tools for saving money, and improving the look of your pickup, but they also provide additional protection for your trucks front end and grill. MOVE plans to increase style, as well as protection by expanding the Full Grille line-up. This will include an upgrade to the Bold Classic 1.5” Full Grille by adding a Beefier, yet just as sleek, 2” Classic Full Grille. This will give the tight fitting, sharp angled, bumper series more customization and providing further protection. For an additional $100 you can upgrade the Classic 1.5" Full Grille to use 2" tubing. FRAME MOUNTS UPGRADED TO 1/4"

Wing light trick tabs optional that come up from the bottom on the right and left-wing of the bumper. 

No Light: No lights or trick tabs

1 Set Light Trick Tabs: One light trick tab on right and left-wing comes with 2 trick tabs

2 Set Light Trick Tabs: Two light trick tabs on both the right and left-wing with 4 trick tabs

Note: Lights not included.

The center light hole customization is for those who want to add a light bar option to their bumper. Options include:

20" cut out - 20" rectangular cutout (3" tall x 21" wide) for light bar 

- Comes with light bar trim and 2 U-Brackets

No cutout - No cutout for light bar

If you select a winch mount setup, additional holes will be shown to mount the winch mount.

Note: Light bar not included. Winch mount option is not available with the optional center light hole.

Winch Mount Upgrade:

Includes additional 1/4" winch mounting plate with winch hole cutout

*Our winch is modeled after a basic/standard 8000 lb. Warn. We've heard of customers that use a 12,000, but we haven’t tested anything larger than the 8000.

Note: Winch is not included. Winch mount is not available with the optional light bar/center light hole.

You can add rear bumper light trick tabs for an additional charge which is for one light on each side of the bumper.

Light trick tabs are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Wing light holes are optional light holes that can be cut on the right and left-wing of the bumper.

No Light Holes: 
No holes cut on either wing for lights

2 Set Light Holes:
Two light holes cut on both the right and left-wing plus mounting tabs

The Center Light Bar Assembly customization is for those who want to add a light bar option to their Bolt together bumper. Options include:

20" Lightbar Assembly- 20" rectangular cut out for lightbar and mounting hardware. This option can be added post-purchase. 

No Lightbar Assembly - Does not include additional pieces to mount a lightbar 

The Front Hitch Receiver Assembly is for those who want to add a winch option to their Bolt together front bumper. Options include:

Hitch Receiver Assembly - 20" rectangular cut out for light bar

No Hitch Receiver Assembly - The assembly will not be included with the bumper kit