You chose:
Not Set
You chose:
See Customer Photos

NOTE: Truck displayed does not represent your truck's specific make, model and year. Only the bumper itself is representative of what you select.

Image does not represent your truck's specific make, model & year

Build Your MOVE Bumper

Start Customizing

Truck

Step 1 of 6

Select Your Truck

Can't find your truck? Let us know.

Note

Truck displayed does not represent your truck's specific make, model and year. Only the bumper itself is representative of what you select.

Classic Front Bumper Kit

Starting at $395.00

Details

  • The Classic weld-it-yourself bumper kit is made with 3/16-inch plate steel
  • Includes ½-inch plate clevis hooks with a 1-inch hole 
  • Add the optional 20” or 30” light bar cutout to fit your light bar
  • Customize your aftermarket front bumper by adding 1 or 2 square wing light holes per side. Perfect to add LED pod lights to your front bumper. 
  • Optional Off-road Upgrade (no winch mount) which includes a 1/4-inch upgraded center section, 1/4-inch frame mounts and 3/4-inch plate clevis hooks with 1.5" X 2.25" hole for multiple attachments (tow straps, chains, hooks). 
  • Optional Off-road Upgrade + Winch Mount includes a custom winch-ready center made of 1/4-inch plate and includes a weld-in mounting plate for your winch. With this option, the MOVE Bumpers logo is smaller and moved to the center with additional airflow holes cut on the sides of the logo. 
  • Option to move the logo to the bottom right of the bumper (not compatible with the Offroad Upgrade Winch Mount)

Ability to Add Custom/Personalized Text or Center Design

Classic Rear Bumper Kit

Starting at $395.00

Details

  • 3/16-inch raw plate steel bumper
  • Options for one light hole per side or no light holes
  • Option for bumper step in bumper endcaps
  • Compatible with all factory receiver hitches

Don't forget to order the flush mount or pod LED lights to fit in your light hole cutouts. 

Classic Full Grille Bumper Kit

Starting at $650.00

Details

  • Weld-it-yourself full grille front bumper kit is made with 3/16 inch plate steel
  • ½-inch plate clevis hooks with a 1-inch hole
  • Full grille guard for your truck or SUV is made of 1.5-inch tubing, 3/16 inch plate uprights and 1/8 inch flat bar caps
  • Ability to have 2 wing lights per side, 1 wing light per side or no wing lights
  • Additional option for 20-inch lightbar cutout, 30-inch lightbar cutout or no lightbar cutout
  • Optional off-road upgrade which includes an upgraded center section (¼ inch plate steel, ¼ inch frame mounts and ¾ inch plate clevis hooks).
  • Select the Off-road Upgrade with Winch Mount to allow for the capability to add a winch to your full grille front bumper. Adds additional airflow holes and a smaller MOVE logo on the top center of the bumper.
  • Additional option to move the logo to the bottom right of the bumper*
  • Upgrade your full grille front bumper kit to 2" tubing for that beefier yet sleek Classic look. 

Ability to Add Custom/Personalized Text or Center Design

Please Note: Cut, miter or coping are required for the tube portion of this Full Grille Front Truck Bumper Kit. Full Grille bumper kit comes as raw, unpainted, laser-cut pieces. 

Bolt Series Front Bumper Kit

Starting at $695.00

Details

 Made of U.S. 3/16-inch plate raw unpainted steel 

 No wing lights or 2 wing lights per side (additional option)

 20" light bar assembly is an additional option

 Front receiver hitch assembly option (can be added at a later time) 

 Optional bull bar, square force, or tubular sport available to bolt on to the top of the bumper kit

 License plate holes and front receiver hitch cutout comes standard

• Comes in 3 modular sections that you bolt together and attach to your vehicle. 

This front heavy-duty truck bumper kit comes with instructions and all the necessary hardware to bolt this bumper together and attach to your truck's existing frame mounts without any welding. 

No Welding Required

Precision Front Bumper Kit

Starting at $395.00

Details

  • The Precision weld-it-yourself bumper kit is made with U.S. 3/16-inch raw plate steel 
  • ½ inch plate clevis hooks with a 1-inch hole
  • Optional cutout for a 20-inch or 30-inch lightbar 
  • Optional universal light pocket on the wings which allows for different size lights to be mounted inside the light pocket 

Heritage Front Bumper Kit

Starting at $430.00

Details

  • U.S. 3/16-inch plate steel
  • Customize your aftermarket front bumper by adding 1 square or round wing light hole per side
  • Add 3/4" clevis hooks to this front bumper kit
  • Includes center license plate indentation along
  • Small MOVE logo in the bottom right corner

Falcon Front Bumper Kit

Starting at $445.00

Details

  • The Falcon weld-it-yourself bumper kit uses 3/16-inch U.S. plate steel
  • Option to add 20” light bar cutout in the center to fit your light bar 
  • Option to add 4 or 6 cube lights to the center o the light 
  • Add wing light hole on each side to fit LED pod lights to your front bumper 
  • Sensor cutouts are available for specific vehicles 

Classic Bull Bar Bumper Kit

Starting at $530.00

Details

  • The 1.5" standard or 2.5" (upgrade) bull bar or push bumper is a weld-it-yourself bumper kit made with 3/16 inch plate steel
  • ½-inch plate clevis hooks with a 1-inch hole
  • 1.5-inch (standard) or 2.5-inch (upgrade) bull bar tubing that goes on top of the aftermarket truck bumper
  • Upgrade to a cutout for a 20-inch or 30-inch light bar 
  • Add 1 or 2 wing square light holes per side with the wing light holes options. Perfect for adding light pods to the front of your truck bumper. 
  • The off-road upgrade includes an upgraded center section with that is ¼ inch plate steel, ¼ inch frame mounts, and ¾ inch plate clevis hooks.
  • Upgrade to the offroad winch mount which adds 1/4" winch mounting plate.
  • Option to move the logo to the bottom right of the bumper which adds air holes in the center section*

Ability to Add Custom/Personalized Text or Center Design

Please Note: Cut, miter or coping required for the tube portion of this aftermarket bull bar front bumper kit

Classic Prerunner Bumper Kit

Starting at $545.00

Details

  • The Classic Prerunner weld-it-yourself bumper kit is made with 3/16 inch plate steel
  • ½-inch plate clevis hooks with a 1-inch hole
  • 1.5-inch prerunner tubing with 1.25-inch wing tube or upgrade to 2.5-inch prerunner tubing with 2-inch wing tubes
  • Upgrade to a cutout for a 20-inch or 30-inch light bar 
  • Add 1 or 2 wing square light holes per side with the wing light holes options
  • The off-road upgrade includes an upgraded center section to ¼ inch plate steel, ¼ inch frame mounts, and ¾ inch plate clevis hooks.
  • Receive a 1/4" winch mounting plate with the optional Winch Mount Off-road upgrade which includes a smaller MOVE logo and airflow holes
  • Option to move the logo to the bottom right of the bumper*

Ability to Add Custom/Personalized Text or Center Design

Please Note: Cut, miter or coping required for the tube portion of this Prerunner front bumper kit. Will come in 8-15 raw, unfinished US steel pieces. 

Precision Bull Bar Bumper Kit

Starting at $530.00

Details

  • Made with U.S. 3/16-inch raw plate steel 
  • ½ inch plate clevis hooks with 1-inch hole to accommodate a clevis pin
  • 1.5-inch or 2.5-inch bull bar center tubing to protect the front of your truck
  • Optional 20-inch or 30-inch lightbar cutout
  • Optional upgrade to the universal light pocket on the wings

Please Note: Cut, miter or coping required for the tube portion of this bull bar truck bumper

Precision Rear Bumper Kit

Starting at $395.00

Details

  • 3/16-inch raw plate steel bumper
  • Options for one light hole per side or no light holes
  • Compatible with all factory receiver hitches

Heritage Rear Bumper Kit

Starting at $430.00

Details

  • U.S. 3/16-inch plate steel
  • Add 1 square or round wing light hole per side on the rear bumper kit
  • Center license plate indentation

Embark Front Bumper Kit

Starting at $445.00

Details

The Embark front weld-it-yourself bumper kit combines tube and plate steel to transform the front of your truck or SUV with a lightweight, rugged bumper for superior protection. The design of this aftermarket bumper kit ensures high-clearance and an off-road look perfect for midsize to large trucks and SUVs. 


 Made of 3/16 inch plate steel and 2" x 0.120" round tubing

 Additional option for 1 or 2 wing lights per side

  Additional option for 20” light bar cutout (3” tall by 21”)

 Additional option for winch mount includes upgraded center section 1/4-inch plate steel

 Comes with standard clevis mounts

Looking for a matching rear bumper? Checkout the Embark Rear Bumper Kit

Classic Square Force Bumper Kit

Starting at $545.00

Details

  • A weld-it-yourself front bumper made with 3/16-inch plate steel bumper
  • ½-inch plate clevis hooks with a 1-inch hole
  • 3/16-inch plate steel square force prerunner
  • Optional light bar cutouts for 20-inch or 30-inch 
  • Additional option to include 2 wing lights per side or 1 wing light per side. Allowing for pod lights to be added to the front truck bumper. 
  • Optional off-road upgrade which includes an upgraded center section (¼ inch plate steel, ¼ inch frame mounts and ¾ inch plate clevis hooks)
  • Add a 1/4" winch mounting plate to the bumper with the Offroad Upgrade with Winch Mount. Plus, the logo is relocated to the top center along with air holes.
  • Option to move the logo to the bottom right of the heavy-duty bumper*

Ability to Add Custom/Personalized Text or Center Design

Note: Comes as raw, unpainted, US steel pieces (8-15). 

Precision Prerunner Bumper Kit

Starting at $545.00

Details

  • 3/16 inch raw, unfinished plate steel bumper
  • ½ inch plate clevis hooks with 1-inch hole 
  • 1.5-inch prerunner tubing with 1.25-inch wing tubes or upgrade to 2.5-inch prerunner tubing with 2-inch wing tubes
  • Optional 20-inch or 30-inch lightbar cutout
  • Optional universal light pocket on the wings

Please Note: Cut, miter or coping required for the tube portion of this aftermarket Prerunner bumper kit. 

Embark Front Bull Bar Bumper Kit

Starting at $535.00

Details

The Embark aftermarket bumper features tube and plate steel that is lightweight yet rugged. This bumper kit is designed for midsize to large trucks and SUVs. 


 Made with American made 3/16 inch plate steel and 2" x 0.120" round tubing

 Included 2" bull bar which can be adjusted during fabrication for looks or approach angle

• Ability to add 1 or 2 wing lights per side

 Optional 20” light bar cutout (3” tall by 21”)

 Add a winch mount cutout with an upgraded center section (1/4-inch plate steel)

Classic Tubular Sport Bumper Kit

Starting at $545.00

Details

  • Weld-it-yourself bumper kit made with 3/16-inch plate steel bumper
  • ½-inch plate clevis hooks with 1-inch holes
  • 2-inch center bars and 3/16-inch uprights
  • Optional light bar cutout for a 20-inch light bar or 30-inch light bar 
  • Options for 2 wing lights per side, 1 wing light per side or no wing lights
  • Optional off-road upgrade which includes an upgraded center section (¼ inch plate steel, ¼ inch frame mounts and ¾ inch plate clevis hooks)
    • Upgrade to the off-road option with winch mount and receive the 1/4" winch mounting plate
  • Option to move the logo to the bottom right of the front bumper

Ability to Add Custom/Personalized Text or Center Design

Note: This front bumper kit comes as unpainted US steel pieces (8-15) that are laser-cut for your specific vehicle. 

Embark Rear Bumper Kit

Starting at $445.00

Details

The Embark rear DIY bumper kit combines tube and plate steel to transform the rear of your truck or SUV with a lightweight, rugged bumper for superior protection. 

 Made of 3/16 inch plate steel and 2" x 0.120" round tubing

Option for 1 wing light trick tab per side

 Comes with standard clevis mounts

Looking for a coordinating front bumper? Checkout the Embark Front Bumper Kit

precision

Precision Full Grille Bumper Kit

Starting at $650.00

Details

  • Made with U.S. 3/16 inch plate steel
  • ½-inch plate clevis hooks with a 1-inch hole
  • Full grille guard for your truck or SUV is made of 1.5-inch tubing, 3/16 inch plate uprights and 1/8 inch flat bar caps
  • Upgrade to the universal light pocket to add pod lights or keep it a clean look without wing lights. 
  • Add a 20-inch or 30-inch lightbar cutout for additional light. 
  • Select the 2" upgrade on the Precision full grille front bumper kit for additional protection.  

Please Note: Cut, miter or coping are required for the tube portion on this Full Grille Front Truck Bumper Kit

Precision Square Force Bumper Kit

Starting at $545.00

Details

  • 3/16 inch raw plate steel bumper
  • ½ inch plate clevis hooks with 1-inch hole or optional ¾ inch plate with 1.5X2.25 hole for multiple attachments (tow straps, chains, hooks)
  • 3/16 inch square force prerunner
  • Options for 20-inch lightbar cutout, 30-inch lightbar cutout or no lightbar cutout
  • Options for light pockets on wings or no light pockets on wings

Heritage Full Grille Bumper Kit

Starting at $650.00

Details

  • Select from 1.5" or 2" tubing for your full grille
  • Option to add 3/4" tow hooks
  • Made with heavy-duty 3/16" U.S. steel
  • Customize your full grille bumper kit by adding square or round wing light holes
  • MOVE logo in the bottom right corner
  • Includes a spot for the front license plate

Falcon Full Grille Front Bumper Kit

Starting at $650.00

Details

  • Full grille includes 1.5" tubing
  • U.S. 3/16" plate steel
  • Optional 20" light bar, 4 cube or 6 cube light cutouts in the center
  • Add wing light holes that fit a 3" x 3" cube light

Please Note: Cut, miter or coping are required for the tube portion of this full grille truck bumper kit

Precision Tubular Sport Bumper Kit

Starting at $545.00

Details

  • 3/16 inch raw plate steel bumper
  • ½ inch plate clevis hooks with a 1-inch hole
  • 2-inch center bars and 3/16 inch uprights
  • Options for 20-inch lightbar cutout, 30-inch lightbar cutout or no lightbar cutout
  • Options for light pockets on wings or no light pockets on wings

Heritage Bull Bar Bumper Kit

Starting at $530.00

Details

  • Select from 1.5", 2", or 2.5" tubing
  • Made with US 3/16-inch plate steel
  • Add 3/4" tow hooks
  • Ability to add 1 square or 1 round wing light hole per side
  • Spot for the front license plate

Please note: Truck images show the overall bumper kit look. When ordering the bull bar front bumper kit the bull bar will be included to weld to the top of this bumper kit. 

Heritage Square Force Bumper Kit

Starting at $545.00

Details

  • U.S. 3/16-inch plate steel
  • Customize your aftermarket front bumper by adding 1 round or square wing light hole per side
  • Add 3/4" clevis mounts
  • Includes center license plate indentation along
  • Small MOVE logo in the bottom right corner

Please note: Truck images show the overall bumper kit look. When ordering this bumper kit it will include the bent plate pieces to add to the top of the Heritage front bumper kit. 

Bolt Series Rear Bumper Kit

Starting at $695.00

Details

Upgrading your rear bumper just got easier! Our Bolt Rear Bumper Kit bolts together in just a few easy steps - no welding required! Custom designed for your vehicle and welded by our team of fabrication experts, your kit will fit the lines and curves of your vehicle with ease.

 Made of U.S. 3/16-inch plate raw steel 

 Option for one light hole per side or no light holes

 Sensor cutouts available for select vehicles

 

This rear heavy-duty bolt together bumper kit comes with instructions on how to bolt the bumper together and attach to your truck's rear frame horns of your vehicle without any welding. 

No Welding Required 

Note: Some trailer plug caps and spare tire rubber boots may need to be updated to fit the provided cut-out. 

Falcon Prerunner Bumper Kit

Starting at $560.00

Details

  • The Falcon Prerunner Bumper Kit includes a pre-bent 1.5" or 2" tubing for the center and wings that you can weld to the top and wings of the bumper
  • Made with 3/16-inch U.S. plate steel
  • Optional 20” light bar cutout 
  • Optional 4 or 6 cube light cutouts for the center or one wing light cutout per side which fit 3" x 3" cube pod lights
  • Sensor cutouts available for specific trucks

Falcon Bull Bar Bumper Kit

Starting at $545.00

Details

  • The Falcon Bull Bar Bumper Kit includes a pre-bent tube to weld to the top of the bumper
  • Select from 1.5", 2", or 2.5" tubing for the bull bar
  • Made with 3/16-inch U.S. plate steel
  • Optional 20” light bar cutout in the center or 4 or 6 cube light cutouts
  • Add a wing light hole on each side to fit 3" x 3" LED pod lights to your front bumper for additional light
  • Sensor cutouts are available for select trucks

Heritage Tubular Sport Bumper Kit

Starting at $545.00

Details

  • Tubular Sport includes 2-inch bars and 3/16-inch uprights 
  • Front bumper kit is made with U.S. 3/16-inch plate steel
  • Add 1 square/round wing light hole per side
  • Add-on 3/4" tow hooks
  • MOVE logo in the bottom right corner
  • Includes a spot for the front license plate

Please note: Images show the bumper kit look but this bumper kit will include the tubular sport bull bar pieces to add to the standard Heritage front bumper kit. 

Falcon Square Force Front Bumper Kit

Starting at $560.00

Details

  • The square force top consists of flat plate steel that is bent to resemble square tubing 
  • 3/16" U.S. steel for the center and wings
  • Optional to add 20” light bar cutout in the center to fit your light bar 
  • Option to add 4 or 6 cube lights to the center of the front bumper kit
  • Add a wing light hole on each side to fit a 3" x 3" cube pod light


Switchback Jeep Front Bumper Kit

Starting at $395.00

Details

Fits Jeep Wrangler JK/JKU (2007 - 2018), JL/JLU (2018 - 2022) and JT (2020 - 2022)

The Switchback Bumper Kit has modular ‘wings’ which can be changed to bring the bumper from stubby to mid-sized to full size. Ready for any change of plans, this bumper kit can be used for multiple applications from rock-crawling to overlanding, and anything in between — you choose. Easily change the look of your Jeep just by adding or removing the wings. Simply bolt up and go.

• Add on the mid and full-width wings to change up the look of your Jeep and to help with overall off-roading or overlanding performance. 

 3/16 inch plate raw unpainted U.S. steel

 Add the winch-compatible upgrade to add a winch on top. The winch-ready upgrade includes 4 mounting holes for a winch, fairlead, and two gussets for extra support.

 Optional 2" bull bar to help protect the front of your Jeep Wrangler

• 1 or 2 wing light cutouts per side (add-on) for a total of 4 3" x 3" cube lights

• License plate holes

• 1/2" clevis hooks come standard

No Welding Required

Overland Jeep Front Bumper Kit

Starting at $395.00

Details

Fits Jeep Wrangler JK/JKU (2007 - 2018), JL/JLU (2018 - 2022) and JT (2020 - 2022)

The Overland Jeep Bumper Kit is full-sized and excursion ready for long trips towards unknown destinations. The Overland is ideal for protecting your Jeep's front, especially when adding a bull bar or full grille. Plus, add 1 or 2 wing light cutouts and/or a 20" light bar cutout to add offroad lights for maximum nighttime visibility. The Overland Bumper Kit has lots of different customization options allowing you to get all the features you want for your Jeep bumper. 

• 3/16-inch plate raw unpainted U.S. steel

 Optional bull bar (1.5", 2", or 2.5" or full grille (1.5" or 2") addon for protection to your Jeep's frontend

• 1 or 2 wing light cutouts per side (add-on)

• Add a 20" light bar cutout 

 Optional 2" front receiver cutout with access holes that allow for additional airflow

• License plate holes

• 3/4" clevis hooks come standard

Welding Required

Trail Jeep Rear Bumper Kit

Starting at $430.00

Details

Fits Jeep Wrangler JK
  • 3/16-inch raw plate steel bumper
  • Options for one light hole per side or no light holes
  • Option for rear 3/4" clevis hooks
  • Compatible with all factory receiver hitches

Don't forget to order the flush mount or pod LED lights to fit in your light hole cutouts. 

Trail Jeep Front Bumper Kit

Starting at $325.00

Details

Fits Jeep Wrangler JK/JKU (2007 - 2018), JL/JLU (2018 - 2022) and JT (2020 - 2022)

The Trail Jeep Bumper Kit is a mid-width bumper that is prepared to take on demanding terrain while providing moderate frontal protection and wheel clearance. The Trail bumper kit was designed for those that seek out the backroads and offroad routes.

• 3/16 inch plate raw unpainted U.S. steel

 Optional 2" bull bar addon for protection to your Jeep's frontend

• Add the universal wing light cutout on each side for additional accessory lighting. Will fit small light bars or cube lights. 

 The winch-ready upgrade will allow you to add a winch to the top of the bumper kit. This includes an extra winch plate on top with 4 bolt hole cutouts for mounting the winch, a fairlead, and gussets for additional strength. 

• License plate holes

• 3/4" clevis hooks come standard

Welding Required

Moab Jeep Front Bumper Kit

Starting at $295.00

Details

This stubby bumper fits Jeep Wrangler JK/JKU (2007 - 2018), JL/JLU (2018 - 2022) and JT (2020 - 2022)

The Moabs’ minimal bumper size provides maximum performance and makes it suitable for more advanced trails and rock-crawling applications. 

• Made of U.S. 3/16 inch plate raw unpainted steel 

 Add a 2" bull bar for additional frontend protection

• Optional 3" x 3" cube center light cutout on each side

 Make your Jeep bumper kit winch-ready with the winch-compatible upgrade. This adds a fair lead, gusset supports behind the bumper, and holes on top for mounting the winch. 

• License plate holes

• 1/2" clevis hooks come standard

Welding Required

Heritage Jeep Front Bumper Kit

Starting at $395.00

Details

Fits Jeep Wrangler JK/JKU (2007 - 2018), JL/JLU (2018 - 2022) and JT (2020 - 2022)

With its timeless style and robust strength, the Heritage bumper kit provides practical utility and classic style ideal for everyday or off-road use. The Heritage is an upgrade over the original factory bumper and is built stronger giving it superior strength and durability while maintaining a look true to the classic Jeep style.

• Made of U.S. 3/16-inch plate raw unpainted steel 

 Add a 2" double-bend bull bar or full grille (1.5" or 2") option for more frontend protection

 License plate holes standard

 3/4" Clevis hooks included

Welding Required

Classic Wing Light Holes

Step 5 of 6

Customize

Classic Wing Light Holes

More Info

More Info

Classic Wing Light Holes

Wing light holes are optional light holes which can be cut on the right and left wing of the bumper.

No Light Holes: 
No holes cut on either wing

1 Set Light Holes: 
One light hole cut on both the right and left wing

2 Set Light Holes:
Two light holes cut on both the right and left wing

Classic Center Light Holes

Step 5 of 6

Customize

Classic Center Light Holes

More Info

More Info

Classic Center Light Holes

The Center Light Hole customization is for those who want to add a light bar option to their bumper. Options include:

20" cut out - 20" rectangular cut out for light bar

30" cut out - 30" rectangular cut out for light bar

No cut out - No cut out for light bar

Classic Offroad Upgrade

Step 5 of 6

Customize

Classic Offroad Upgrade

More Info

More Info

Classic Offroad Upgrade

Offroad Upgrade:

Features 1/4" center, 1/4" frame mounts and larger clevis hooks 

Offroad Upgrade + Winch Mount:

Includes additional 1/4" winch mounting plate that you weld-in for your winch.

*Our winch is modeled after a basic/standard 8000 lb. Warn. We've heard of customers that use a 12,000, but we haven’t tested anything larger than the 8000. Contact us if you have specific questions about winch fitment.

Classic Rear Clevis Hooks

Step 5 of 6

Customize

Classic Rear Clevis Hooks

More Info

More Info

Classic Rear Clevis Hooks

Standard Clevis Mounts
3/8" Thick Clevis Mounts

Off-Road Clevis Mounts
5/8" Thick Clevis Mounts

Classic Rear Light Holes

Step 5 of 6

Customize

Classic Rear Light Holes

More Info

More Info

Classic Rear Light Holes

You can add rear bumper light holes for an additional charge. Light mounting clips are included.

Light holes are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Precision Rear Light Holes

Step 5 of 6

Customize

Precision Rear Light Holes

More Info

More Info

Precision Rear Light Holes

You can add rear bumper light holes for an additional charge. Light mounting clips are included.

Light holes are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Precision Wing Light Holes

Step 5 of 6

Customize

Precision Wing Light Holes

More Info

More Info

Precision Wing Light Holes

Wing light holes are optional light holes which can be cut on the right and left wing of the bumper.

No Light Holes: 
No holes cut on either wing

Light Holes:

Universal light pocket on both the right and left wing

Precision Center Light Holes

Step 5 of 6

Customize

Precision Center Light Holes

More Info

More Info

Precision Center Light Holes

The Center Light Hole customization is for those who want to add a light bar option to their bumper. Options include:

20" cut out - 20" rectangular cut out for light bar

30" cut out - 30" rectangular cut out for light bar

No cut out - No cut out for light bar

Note: if you select winch mount setup, additional holes will be shown to mount the winch mount.

Include a Rear Bumper Step

Step 5 of 6

Customize

Include a Rear Bumper Step

More Info

More Info

Include a Rear Bumper Step

Our rear bumper with step includes integrated steps on both sides of the tailgate. 

Please note: This is a new product that may not be available for all truck makes/models/years. We’ll give you a call if we have any issues with your order.

Reinforce Rear Upgrade

Step 5 of 6

Customize

Reinforce Rear Upgrade

More Info

More Info

Reinforce Rear Upgrade

  • 3/16" gusset plates combined with 3/16" flat bar to increase rigidity within the bumper shell to accommodate increased loads
  • Reinforcement package is recommended if load exceeds 85lbs

Classic Logo Placement

Step 5 of 6

Customize

Classic Logo Placement

More Info

More Info

Classic Logo Placement

Option to move the MOVE logo to the bottom right of the bumper center. With this option, the MOVE Bumpers logo is smaller and moved to the bottom right with additional airflow holes cut in the center. 

NOTE: Not compatible with Offroad Upgrade or light bar.

Classic 2" Full Grille Upgrade

Step 5 of 6

Customize

Classic 2" Full Grille Upgrade

More Info

More Info

Classic 2" Full Grille Upgrade

Increase the protection of your truck or SUV's front end by upgrading to 2" tubing from the standard 1.5" tubing. 

Embark Front Wing Light Trick Tabs

Step 5 of 6

Customize

Embark Front Wing Light Trick Tabs

More Info

More Info

Embark Front Wing Light Trick Tabs

Wing light trick tabs optional that come up from the bottom on the right and left-wing of the bumper. 

No Light: No lights or trick tabs

1 Set Light Trick Tabs: One light trick tab on right and left-wing comes with 2 trick tabs

2 Set Light Trick Tabs: Two light trick tabs on both the right and left-wing with 4 trick tabs

Note: Lights not included.

Embark Center Light Hole

Step 5 of 6

Customize

Embark Center Light Hole

More Info

More Info

Embark Center Light Hole

The center light hole customization is for those who want to add a light bar option to their bumper. Options include:

20" cut out - 20" rectangular cutout (3" tall x 21" wide) for light bar 

- Comes with light bar trim and 2 U-Brackets

No cutout - No cutout for light bar

If you select a winch mount setup, additional holes will be shown to mount the winch mount.

Note: Light bar not included. Winch mount option is not available with the optional center light hole.

Embark Winch Mount

Step 5 of 6

Customize

Embark Winch Mount

More Info

More Info

Embark Winch Mount

Winch Mount Upgrade:

Features 1/4" frame mounts and 1/4" winch mounting plate 

*Due to the high and tight design of the Embark Front Bumper Kit, winch space is limited to approximately 6 5/8" (H), 6 7/16" (D), & 21.4" (W). We cannot guarantee the fitment of anything larger than an 8,000 lb. Warn winch or equivalent. 

Note: Winch is not included. Winch mount is not available with the optional light bar/center light hole.

If you have specific winch fitment questions for your specific vehicle please contact our tech team.

Embark Rear Light Trick Tabs

Step 5 of 6

Customize

Embark Rear Light Trick Tabs

More Info

More Info

Embark Rear Light Trick Tabs

You can add rear bumper light trick tabs for an additional charge which is for one light on each side of the bumper.

Light trick tabs are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Bolt Together Wing Light Holes

Step 5 of 6

Customize

Bolt Together Wing Light Holes

More Info

More Info

Bolt Together Wing Light Holes

Wing light holes are optional light holes that can be cut on the right and left-wing of the bumper.

No Light Holes: 
No holes cut on either wing for lights

2 Set Light Holes:
Two light holes cut on both the right and left-wing plus mounting tabs

Bolt Together Center Light Bar Assembly

Step 5 of 6

Customize

Bolt Together Center Light Bar Assembly

More Info

More Info

Bolt Together Center Light Bar Assembly

The Center Light Bar Assembly customization is for those who want to add a light bar option to their Bolt together bumper. Options include:

20" Lightbar Assembly- 20" rectangular cut out for lightbar and mounting hardware. This option can be added post-purchase. 

No Lightbar Assembly - Does not include additional pieces to mount a lightbar 

Bolt Together Hitch Receiver Assembly

Step 5 of 6

Customize

Bolt Together Hitch Receiver Assembly

More Info

More Info

Bolt Together Hitch Receiver Assembly

The Front Hitch Receiver Assembly is for those who want to add a winch option to their Bolt together front bumper. Options include:

Hitch Receiver Assembly - Bolts to the front Bolt bumper allowing for a 2" front hitch receiver which can be used for a winch cradle, cargo basket, or any other accessory that fits a 2" hitch receiver.

Front Hitch AssemblyFront Hitch Assembly Bolt Bumper Kit


No Hitch Receiver Assembly - The assembly will not be included with the bumper kit. The front hitch hole is on all BOLT Bumper Kits but can be covered by a license plate. 

Classic Running Boards Length

Step 5 of 6

Customize

Classic Running Boards Length

More Info

More Info

Classic Running Boards Length

Select the length of your Classic Running Boards either single cab or extended & crew cab. 

Single Cab- At approximately 50" our single cab running boards are designed to fit the majority of your cab, centralizing the step area within the parameters of your driver/passenger doors.

Extended Cab/Crew Cab- At approximately 85" our extended cab, and crew cab running boards maintain the same length of the board while centralizing the front steps for your front driver/passenger doors, and the rear steps accessible for your rear driver/passenger doors. 

Classic Running Boards Style

Step 5 of 6

Customize

Classic Running Boards Style

More Info

More Info

Classic Running Boards Style

Select from standard or enhance the grip of your running boards with a dimple die upgrade.

Embark Running Boards Style

Step 5 of 6

Customize

Embark Running Boards Style

More Info

More Info

Embark Running Boards Style

Select from standard or enhance the grip of your running boards with a dimple die upgrade.

Embark Running Boards Length

Step 5 of 6

Customize

Embark Running Boards Length

More Info

More Info

Embark Running Boards Length

Select the length of your Embark Running Boards either single cab or extended & crew cab. 

Single Cab- At approximately 50" our single cab running boards are designed to fit the majority of your cab, centralizing the step area within the parameters of your driver/passenger doors.

Extended Cab/Crew Cab- At approximately 85" our extended cab, and crew cab running boards maintain the same length of the board while centralizing the front steps for your front driver/pas


Precision 2" Full Grille Upgrade

Step 5 of 6

Customize

Precision 2" Full Grille Upgrade

More Info

More Info

Precision 2" Full Grille Upgrade

Upgrade to the Precision 1.5” Full Grille to a 2" Full Grille. This will provide more front-end protection to your rig.

For an additional amount you can upgrade the Precision 1.5" Full Grille to use 2" tubing for additional frontend protection.

Precision Running Boards Length

Step 5 of 6

Customize

Precision Running Boards Length

More Info

More Info

Precision Running Boards Length

Select the length of your Precision Running Boards either single cab or extended & crew cab. 

Single Cab- At approximately 50" our single cab running boards are designed to fit the majority of your cab, centralizing the step area within the parameters of your driver/passenger doors.

Extended Cab/Crew Cab- At approximately 85" our extended cab, and crew cab running boards maintain the same length of the board while centralizing the front steps for your front driver/passenger doors, and the rear steps accessible for your rear driver/passenger doors. 

Bolt Rear Light Holes

Step 5 of 6

Customize

Bolt Rear Light Holes

More Info

More Info

Bolt Rear Light Holes

Add rear bumper light hole cutouts to the bolt rear bumper for an additional charge. Light mounting clips are included.

Light holes are large enough to accommodate most single stud mounting LED light pods. They are designed to fit lights that are 4" wide by 3" tall.  

NOTE: LED lights are sold separately and these are only the cutouts for the lights.

Bolt Rear Sensor Cutouts

Step 5 of 6

Customize

Bolt Rear Sensor Cutouts

More Info

More Info

Bolt Rear Sensor Cutouts

Rear bumper sensor hole cutouts are an additional option for select make, models, and years. Please select this option if your vehicle has rear sensor cutouts.

Heritage Bull Bar

Step 5 of 6

Customize

Heritage Bull Bar

More Info

More Info

Heritage Bull Bar

Add a 2" double-bend bull bar to the Heritage Jeep bumper kit. 

Heritage Full Jeep Grille

Step 5 of 6

Customize

Heritage Full Jeep Grille

More Info

More Info

Heritage Full Jeep Grille

Add a full grille to the Heritage Jeep bumper kit. 

Moab Bull Bar

Step 5 of 6

Customize

Moab Bull Bar

More Info

More Info

Moab Bull Bar

Add a bull bar to the Moab Jeep bumper kit. 1.5" tubing will be used for the bull bar.

Moab Center Lights

Step 5 of 6

Customize

Moab Center Lights

More Info

More Info

Moab Center Lights

Add light cutouts to the center of the Moab Jeep Bumper. Fits 3"x3" cube lights. 

Moab Winch-Ready Option

Step 5 of 6

Customize

Moab Winch-Ready Option

More Info

More Info

Moab Winch-Ready Option

Add a winch to the Moab Jeep bumper kit with the winch-ready option. Fits winch approximately 25" long and 7" deep. Adds bolt holes for mounting a winch, fairlead, and gussets behind the bumper for additional support.

Trail Bull Bar

Step 5 of 6

Customize

Trail Bull Bar

More Info

More Info

Trail Bull Bar

Add a bull bar to the Trail front Jeep bumper kit. 2" tubing will be used for the bull bar.

Trail Winch-Ready Option

Step 5 of 6

Customize

Trail Winch-Ready Option

More Info

More Info

Trail Winch-Ready Option

Add a winch to the top of the Trail Jeep bumper kit with the winch-ready option. Fits winch approximately 25" long and 7" deep

Trail Wing Light Holes

Step 5 of 6

Customize

Trail Wing Light Holes

More Info

More Info

Trail Wing Light Holes

Add a universal wing light cutouts to the Trail Jeep Bumper. Fits 3"x3" cube lights, small light bars, and more.

Overland Bull Bar

Step 5 of 6

Customize

Overland Bull Bar

More Info

More Info

Overland Bull Bar

Add a bull bar to the Overland Jeep bumper kit either 1.5" or 2"

Overland Full Grille

Step 5 of 6

Customize

Overland Full Grille

More Info

More Info

Overland Full Grille

Add a full grille to the Overland Jeep bumper kit. 

Overland Wing Light Holes

Step 5 of 6

Customize

Overland Wing Light Holes

More Info

More Info

Overland Wing Light Holes

Add a wing light cutouts to the Overland Jeep Bumper. Fits 3"x3" cube lights. Either 1 or 2 per side

No Light Holes: 
No holes cut on either wing

1 Set Light Holes: 
One light hole cut on both the right and left wing

2 Set Light Holes:
Two light holes cut on both the right and left wing

Overland Center Light Hole

Step 5 of 6

Customize

Overland Center Light Hole

More Info

More Info

Overland Center Light Hole

Add a center light cutout to the Overland Jeep Bumper. Fits 20" light bar

Overland Center Section

Step 5 of 6

Customize

Overland Center Section

More Info

More Info

Overland Center Section

Add a center hitch receiver hole to the Overland Jeep bumper kit. If selected additional holes are added to the sides for access and airflow.

Select the 20" light bar cutout to add a light bar to the center of this bumper kit.

Switchback Bull Bar

Step 5 of 6

Customize

Switchback Bull Bar

More Info

More Info

Switchback Bull Bar

Add a bull bar to the Switchback Jeep bumper kit. 2" tubing will be used for the bull bar.

Switchback Mid Wings

Step 5 of 6

Customize

Switchback Mid Wings

More Info

More Info

Switchback Mid Wings

Add mid wings to the Switchback Jeep Bumper. 

Switchback Mid Wing Light Cutouts

Step 5 of 6

Customize

Switchback Mid Wing Light Cutouts

More Info

More Info

Switchback Mid Wing Light Cutouts

Add wing light cutouts to the mid-wing for the Switchback Jeep Bumper. Fits 3"x3" cube lights. 

Switchback Full Wings

Step 5 of 6

Customize

Switchback Full Wings

More Info

More Info

Switchback Full Wings

Add full-length wings to the Switchback Jeep Bumper. 

Switchback Full-Width Wing Light Cutouts

Step 5 of 6

Customize

Switchback Full-Width Wing Light Cutouts

More Info

More Info

Switchback Full-Width Wing Light Cutouts

Add wing light cutouts to the full-width wings for the Switchback Jeep Bumper. Either 1 or 2 cutouts per side. Fits 3"x3" cube lights. 

Switchback Winch-Ready Option

Step 5 of 6

Customize

Switchback Winch-Ready Option

More Info

More Info

Switchback Winch-Ready Option

Add the winch-ready to the Switchback Jeep bumper kit to add a winch to the top of the bumper kit. Fits a winch approximately 25" long and 7" deep. Includes 2 gussets that provide additional support behind the bumper, 4 bolt cutouts for mounting a winch, and a winch fairlead. 

Trail Rear Light Holes

Step 5 of 6

Customize

Trail Rear Light Holes

More Info

More Info

Trail Rear Light Holes

You can add rear bumper light holes for an additional charge. Light mounting clips are included.

Light holes are large enough to accommodate most single stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Trail Rear Clevis Hooks

Step 5 of 6

Customize

Trail Rear Clevis Hooks

More Info

More Info

Trail Rear Clevis Hooks

Standard Clevis Mounts
1/2" Thick Clevis Mounts

Falcon Wing Light Holes

Step 5 of 6

Customize

Falcon Wing Light Holes

More Info

More Info

Falcon Wing Light Holes

Wing light holes are optional light holes which can be cut on the right and left wing of the bumper.

No Light Holes: 
No holes cut on either wing

1 Set Light Holes: 
One light hole cut on both the right and left wing

Falcon Sensor Cutouts

Step 5 of 6

Customize

Falcon Sensor Cutouts

More Info

More Info

Falcon Sensor Cutouts

Add sensor cutouts to your Falcon bumper kit. Only available for the makes, models, and years that

Falcon Center Light Holes

Step 5 of 6

Customize

Falcon Center Light Holes

More Info

More Info

Falcon Center Light Holes

The Center Light Hole customization is for those who want to add a light bar or cube light options to their Falcon Bumper Kit. 

Options include:

20" cut out - 20" rectangular cutout for light bar

4 Cube Lights - Fits 4 3"x3" cube Lights

6 Cube Lights Fits 6 3"x3" cube Lights

No cut out - No cutout for light bar

Falcon Bull Bar Tubing Size

Step 5 of 6

Customize

Falcon Bull Bar Tubing Size

More Info

More Info

Falcon Bull Bar Tubing Size

Select from 1.5", 2", or 2.5" tubing for the bull bar

Falcon Prerunner Tubing Size

Step 5 of 6

Customize

Falcon Prerunner Tubing Size

More Info

More Info

Falcon Prerunner Tubing Size

Select from 1.5" or 2" tubing for the prerunner

Falcon Clevis Mounts

Step 5 of 6

Customize

Falcon Clevis Mounts

More Info

More Info

Falcon Clevis Mounts

Add clevis mounts to your Falcon bumper kit

Precision Logo Placement

Step 5 of 6

Customize

Precision Logo Placement

More Info

More Info

Precision Logo Placement

Option to move the MOVE logo to the bottom right of the bumper center or add additional airflow. Plus, add a center design to the middle of the Precision Series Bumper Kit. With this option, the MOVE Bumpers logo is smaller and moved to the bottom right with additional airflow holes cut in the center.

 

Please note that this option is not available with light bars. 

Classic Custom Text

Step 5 of 6

Customize

Classic Custom Text

More Info

More Info

Classic Custom Text

Add custom text to the center of your bumper kit. Select up to 9 different characters to display.

NOTE: Not compatible with Offroad Upgrade or Light Bar. 

Heritage Wing Light Holes

Step 5 of 6

Customize

Heritage Wing Light Holes

More Info

More Info

Heritage Wing Light Holes

Wing light holes are optional light holes which can be cut on the right and left wing of the bumper.

No Light Holes: 
No holes cut on either wing

1 Set Square Light Holes: 
One light hole cut on both the right and left wing to fit cube/square light pods

1 Set Round Light Holes:
One light hole cut on both the right and left wing to fit round light pods up to 4"

Heritage Clevis Mounts

Step 5 of 6

Customize

Heritage Clevis Mounts

More Info

More Info

Heritage Clevis Mounts

Add clevis mounts to your Heritage bumper kit

Heritage Tubing Size

Step 5 of 6

Customize

Heritage Tubing Size

More Info

More Info

Heritage Tubing Size

Select from 1.5", 2", or 2.5" tubing for the bull bar

Heritage Tube Grille Size

Step 5 of 6

Customize

Heritage Tube Grille Size

More Info

More Info

Heritage Tube Grille Size

Select from 1.5" or 2" tubing for the bull bar

Heritage Rear Light Holes

Step 5 of 6

Customize

Heritage Rear Light Holes

More Info

More Info

Heritage Rear Light Holes

You can add rear bumper light holes for an additional charge. Add either square or round light hole on each side of the rear bumper. Light mounting clips are included.

Light holes are large enough to accommodate most single-stud mounting lights. They are designed to fit lights that are 4" wide by 3" tall.

Lights mount behind the face of the bumper, which means all types of lights can be mounted in the bumper, including larger or smaller than the noted light. 

NOTE: Lights sold separately.

Classic Bull Bar Tubing Size

Step 5 of 6

Customize

Classic Bull Bar Tubing Size

More Info

More Info

Classic Bull Bar Tubing Size

Select from 1.5" or 2.5" tubing for the bull bar

Classic Prerunner Tubing Size

Step 5 of 6

Customize

Classic Prerunner Tubing Size

More Info

More Info

Classic Prerunner Tubing Size

1.5-inch prerunner tubing with 1.25-inch wing tube or upgrade to 2.5-inch prerunner tubing with 2-inch wing tubes

Precision Prerunner Tubing Size

Step 5 of 6

Customize

Precision Prerunner Tubing Size

More Info

More Info

Precision Prerunner Tubing Size

1.5-inch prerunner tubing with 1.25-inch wing tube or upgrade to 2.5-inch prerunner tubing with 2-inch wing tubes

Precision Bull Bar Tubing Size

Step 5 of 6

Customize

Precision Bull Bar Tubing Size

More Info

More Info

Precision Bull Bar Tubing Size

Select from 1.5" or 2.5" tubing for the bull bar

Bolt Together Bar Options

Step 5 of 6

Customize

Bolt Together Bar Options

More Info

More Info

Bolt Together Bar Options

Select from 3 different add-on bar options to add to your BOLT front bumper. 

No Bar Option- Standard option without any top bar.

Bull Bar - Add a 2" bull bar to the top of your BOLT bumper kit. Includes 3/16" thick plate mounting pads and three 1/2" bolt mounting locations per side. 

Square Force - Add a 3/16" plate steel square force to the top of your BOLT bumper kit. Easily mount using the mounting pads with three 1/2" bolts per side. 

Tubular Sport - Features 2" thick round tubing combined with 3/16" thick plate steel uprights. Includes 3/16" mounting pads with three 1/2" bolts per side. 

Are you sure you want to exit?

All bumper customizations will be lost.

Changing truck type will reset all current customizations.

Do you still want to proceed?

Save your Bumper!

Enter your email below to get a custom link with your bumper kit build. Share with friends and family, or save for when you're ready to buy.